To Next Page
L
lcollinsSep 12, 2025
What to do if Sumitomo SM-HYPONIC Hypoid Engine brake slips (Braking time is too long)?
- DDanielle CookSep 12, 2025
To address the issue of a Sumitomo Engine brake slipping (braking time is too long), wire for fast action.
What to do if Sumitomo SM-HYPONIC Hypoid Engine brake slips (Braking time is too long)?
To address the issue of a Sumitomo Engine brake slipping (braking time is too long), wire for fast action.
What to do with worn brake lining of Sumitomo Engine?
To resolve worn brake lining on your Sumitomo Engine, adjust the brake gap or replace the lining.
What to do if Sumitomo SM-HYPONIC Hypoid rotor fails to turn?
If the rotor of your Sumitomo Engine fails to turn, check the electric circuit for any faults.
Mounting conditions, location, and procedures for solid shaft type gearmotors.
Mounting conditions, location, and procedures for hollow shaft type gearmotors.
Details on using spacer, plate, and end plate mounting options.
Procedures for installing torque arm and removing the gearmotor shaft.
Ensures proper alignment for flange and foot mounting to avoid excessive force.
Procedures for connecting the gearmotor to the driven machine via solid shaft.
Shows standard wiring diagrams for dual voltage connections.
Illustrates wiring diagrams for inverter connections with dual voltage.
Indicates output shaft rotation directions based on wiring configurations.
Essential precautions for motor operation, including grounding and insulation.
Precautions to observe during the initial test run of the gearmotor.
Lists specific items to inspect daily for gearmotor health and performance.
Lists standard specifications for FB-01A, FB-02A, and FB-05A brake models.
Details the construction and operating principles of FB-01A, FB-02A, FB-05A brake assemblies.
Covers inspection, gap adjustment, and brake lining replacement for FB-01A, FB-02A, FB-05A.
Lists standard specifications for FB-1B, FB-2B, and FB-3B brake models.
Details the construction and operating principles of FB-1B, FB-2B, FB-3B brake assemblies.
Covers inspection, manual release, and gap adjustment for FB-1B, FB-2B, FB-3B.
Procedure for replacing worn brake lining on FB-1B, FB-2B, FB-3B models.
Lists standard specifications for FB-5B and FB-8B brake models.
Details the construction and operating principles of FB-5B, FB-8B brake assemblies.
Covers inspection, manual release, and gap adjustment for FB-5B, FB-8B.
Procedure for replacing worn brake lining on FB-5B, FB-8B models.
A guide to diagnose and fix common SM-Hyponic operational problems.
Illustrates the internal construction of RNFM and RNYM series gearmotors.
General
