Sun Microsystems StorageTek 2500 Series User Manual

98 Sun StorageTek 2500 Series Array Hardware Installation Guide • March 2007
B
block
The amount of data sent or received by the host per I/O operation; the size of a data
unit.
C
capacity
The amount of storage you must allocate to storage elements, including volumes,
pools, and virtual disks. Capacity planning should include allocations for volume
snapshots and volume copies.
CLI
Command-line interface. The SSCS command-line interface is available from the
remote CLI client or through an SSCS directory on the Solaris Operating System
management software station.
controller tray
A tray with an installed redundant RAID controller pair. In a Sun StorageTek 2500
Series array, 1x1, 1x2, 1x3, and 1x4 array types are available.
control path
The route used for communication of system management information, usually an
out-of-band connection.
customer LAN
See
site LAN.
D
DAS
See
direct attached storage (DAS).
data host
Any host that uses the system for storage. A data host can be connected directly to
the array (direct attach storage, or DAS) or can be connected to an external switch
that supports multiple data hosts (storage area network, or SAN). See also
host.

Sun Microsystems StorageTek 2500 Series Specifications

General

Brand	Sun Microsystems
Model	StorageTek 2500 Series
Category	Speaker System
Language	English