Sun Microsystems StorageTek 2500 Series User Manual

vi Sun StorageTek 2500 Series Array Hardware Installation Guide • March 2007
▼ To Obtain Traffic Manager for Operating Systems Other Than Solaris 68
Installing Data Host Software for Operating Systems Other Than Solaris 69
About Data Host Software For Non-Solaris Platforms 69
Downloading and Installing Sun RDAC Software 69
Enabling Multipathing Software 70
▼ Enabling Multipathing Software for Solaris 8 or 9 OS 70
▼ Enabling Multipathing Software for Solaris 10 OS 71
Next Steps 71
6. Configuring IP Addressing 73
About IP Addressing 73
Configuring the IP Address of the Array Controllers 74
Configuring Dynamic (DHCP) IP Addressing 74
Configuring Static IP Addressing 75
Using the Serial Port Interface to Assign IP Addresses 75
▼ To Connect a Terminal to the Serial Port 75
▼ To Set Up the Terminal Emulation Program 76
▼ To Establish a Connection With the Serial Port 77
▼ To Configure the IP Addresses 78
A. Configuring a DHCP Server 81
Before You Begin 81
Setting Up a Solaris DHCP Server 81
Setting Up a Windows 2000 Advanced Server 86
Installing the DHCP Server 87
Configuring the DHCP Server 87
B. Using DC Power 91
DC Power Overview 91
Installation Notes for DC Power 92

Sun Microsystems StorageTek 2500 Series Specifications

General

Brand	Sun Microsystems
Model	StorageTek 2500 Series
Category	Speaker System
Language	English