82 Sun StorageTek 2500 Series Array Hardware Installation Guide • March 2007
2. Start the DHCP wizard by issuing the following command at the command
line:
/usr/sadm/admin/bin/dhcpmgr &
The following window is displayed:
The wizard will prompt you for information related to the configuration, network
address, and subnet mask of the controller tray. Select or enter the following
information:
■ Data storage format: Text files
■ Nameservice to store host records: Do not manage hosts records
■ Length of lease:
■ Network Address: Network address of Controller A
■ Subnet Mask: For example, 255.255.255.0
■ Network Type: Local-Area (LAN)
■ Router: Use router discovery protocol
Your summary page should look similar to the following example:
To Next Page
Loading...
Need help?
General
