Intro(8)
Intro 5
showdscp display the IP addresses assigned to the Domain to Service
Processor Communications Protocol (DSCP)
showdualpowerfeed display the current setting of dual power feed mode
showemailreport display the email report configuration data
showenvironment display the air flow volume, intake air temperature and
humidity, temperature sensor, voltage sensor, fan speed,
and power consumption information in the server
showfru display the hardware settings of specified device
showhardconf display information about Field Replaceable Units (FRUs)
installed in the system
showhostname display the current host name for the XSCF unit
showhttps display the status of the HTTPS service set for the XSCF
network
showldap display the Lightweight Directory Access Protocol (LDAP)
configuration for the Service Processor
showlocale display the current setting for the XSCF locale
showlocator display the state of the CHECK LED on the operator panel
showloginlockout display the account lockout setting
showlogs display the specified log
showlookup display the configuration for authentication and privileges
lookup
showmonitorlog display the contents of monitoring messages in real time
shownameserver display the registered domain name system (DNS) servers
specified on the XSCF network
shownetwork display information of network interfaces for XSCF
shownotice display copyright and license information for the copyright
information for eXtended System Control Facility (XSCF)
Control Package (XCP)
showntp display the NTP servers currently set for the XSCF network
showpasswordpolicy display the current password settings
showpowerupdelay display the current settings for the warm-up time of the
system and wait time before system startup
showresult display the exit status of the most recently executed
command
To Next Page
Loading...
Need help?
General
