Intro(8)
6 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
showroute display routing information for an XSCF network interface
showshutdowndelay show the shutdown wait time at power interruption of the
uninterruptible power supply (UPS)
showsmtp display the Simple Mail Transfer Protocol (SMTP)
configuration information
showsnmp display the configuration information and current status of
the SNMP agent
showsnmpusm display the current User-based Security Model (USM)
information for the SNMP agent
showsnmpvacm display the current View-based Access Control Access
(VACM) information for the SNMP agent
showssh display the settings of the Secure Shell (SSH) service that
configured for the XSCF network
showstatus display the degraded Field Replaceable Units (FRUs)
showsunmc show setup information and status of Sun Management
Center agent
showtelnet display the current status of the telnet service for the XSCF
network
showtimezone display the XSCF time zone and Daylight Saving Time
information of current settings
showuser display user account information
snapshot collect and transfer environment, log, error, and FRUID
data
switchscf switch the XSCF unit between the active and standby states
testsb perform an initial diagnosis of the specified physical system
board (PSB)
traceroute display the route packets take to the specified network host
or the network device
unlockmaintenance forcibly release the locked status of XSCF
version display firmware version
viewaudit display audit records
who display a list of the user accounts who are logged in to the
XSCF
To Next Page
Loading...
Need help?
General
