setnameserver(8)
214 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised June 2007
EXTENDED
DESCRIPTION
â– If multiple DNS servers are specified, names are solved in the order specified.
â– To reflect the DNS server name to XSCF, execute the applynetwork(8)
command. After reflected the information, use the rebootxscf(8) command to
reset XSCF to complete the setting.
â– The currently set DNS server can be checked by using the shownameserver(8)
command.
EXAMPLES
EXAMPLE 1 Adds the hosts with the IP addresses 192.168.1.2, 10.18.108.10, and 10.24.1.2
as DNS server. Names are solved in the order specified.
EXAMPLE 2 Deletes the host with the IP address 10.18.108.10 from the DNS server.
EXAMPLE 3 Deletes all the DNS servers.
EXIT STATUS The following exit values are returned:
SEE ALSO rebootxscf(8), shownameserver(8)
XSCF> setnameserver 192.168.1.2 10.18.108.10 10.24.1.2
XSCF> setnameserver -c del 10.18.108.10
XSCF> setnameserver -c del -a
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
Need help?
General
