showlogs(8)
System Administration 389
OPERANDS The following operands are supported:
EXTENDED
DESCRIPTION
Logs are displayed in the following formats:
â– Error log
Default
Case where the -v option is specified
error Displays the error log. (sometimes includes scan log)
power Displays the power log.
event Displays the event log.
env Displays the temperature and humidity record.
monitor Displays the monitoring message log.
console Displays the console message log.
panic Displays the panic message log.
ipl Displays the IPL message log.
Date: Mar 30 17:45:31 JST 2005 Code: xxxxxxxx-xxxxxxxx-
xxxxxxxxxxxxxxxx
Status: Alarm Occurred: Mar 30 17:45:31.000 JST 2005
FRU: PSU#1,PSU#2,*
Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
Date: Mar 30 17:45:31 JST 2005 Code: xxxxxxxx-xxxxxxxx-xxxxxxxxxxxxxxxx
Status: Alarm Occurred: Mar 30 17:45:31.000 JST 2005
FRU: PSU#1,PSU#2,*
Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
Diagnostic Code:
xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
UUID: bf36f0ea-9e47-42b5-fc6f-c0d979c4c8f4 MSG-ID:FMD-8000-11
To Next Page
Loading...
Need help?
General
