shownetwork(8)
System Administration 411
EXAMPLE 7 Displays the information for XSCF unit 0 and XSCF unit 1 in the M8000/
M9000 servers.
XSCF> shownetwork -a
xscf#0-lan#0
Link encap:Ethernet HWaddr 00:00:00:12:34:56
inet addr: 192.168.11.10 Bcast: 192.168.11.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12241827 (11.3 MiB) TX bytes:1189769 (0.9 MiB)
Base address:0x1000
xscf#0-lan#1
Link encap:Ethernet HWaddr 00:00:00:12:34:57
inet addr:192.168.10.11 Bcast: 192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:20241827 (19.3 MiB) TX bytes:2089769 (1.9 MiB)
Base address:0x1000
xscf#0-if Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.10.128 Bcast:192.168.10.255 Mask: 255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:17010 (16.6 KiB)
Base address:0x1000
xscf#1-lan#0
To Next Page
Loading...
Need help?
General
