shownetwork(8)
410 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
EXAMPLE 4 Displays the information for XSCF-LAN#0 on XSCF Unit 0.
EXAMPLE 5 Displays the information for the takeover IP address for XSCF-LAN#0.
EXAMPLE 6 Displays the current settings of XSCF network.
inet addr:192.168.10.128 Bcast: 192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:(0.0 B) TX bytes:17010 (16.6 KiB)
Base address:0x1000
XSCF>
shownetwork xscf#0-lan#0
xscf#0-lan#0
Link encap:Ethernet HWaddr 00:00:00:12:34:56
inet addr:192.168.11.10 Bcast:192.168.11.255 Mask 255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14541827 (13.8 MiB) TX bytes:1459769 (1.3 MiB)
Base address:0x1000
XSCF> shownetwork lan#0
lan#0 Link encap:Ethernet HWaddr 00:00:00:12:34:56
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Base address:0xe000
XSCF> shownetwork -i
Active Internet connections (without servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 xx.xx.xx.xx:telnet xxxx:1617 ESTABLISHED
To Next Page
Loading...
Need help?
General
