29
- The grind setting can then be adjusted.
Use the double shot button to increase
the Grind setting, or the single shot
button to decrease.
- Press the manual brew button to save the
new setting. The unit will beep once and
return to the steady state condition.
Example; if you always used to make
your coffee at grind size 13, but now
believe the machine is under extracting
at this position, you may want to change
to setting 12 or 11. As the burrs are
not adjusted during this process, this
recalibrates the unit and dials out the
adjustment lost due to burr wear
Restore – factory grind settings
- Press and hold all 3 EXTRACTION
BUTTONS, simultaneously pushing
downwards on the Group Handle handle
at the same time for 3 seconds.
- The machine will beep and all 3
EXTRACTION BUTTON LIGHT ICONS and
the grind icon will flash together.
- The default espresso volumes have been
restored.
- The machine will return to the READY
state.
Fine tuning your espresso
+
PRESS
SINGLE SHOT
TO DECREASE
PRESS
DOUBLE SHOT
TO INCREASE
PUSH
HANDLE
DOWN
To Next Page
Loading...
