39
- The STEAM LIGHT will
now be fully illuminated.
- The Pump will start and hot water will
run from the Group Head & Steam Wand.
- After 2 minutes water will stop pumping
and the steam light will flash.
- Return the dial to the vertical position.
- The HOT WATER LIGHT
will now be fully illuminated.
- Turn the DIAL to the HOT WATER position.
- The Pump will start and hot water will
run from the HOT WATER TAP.
- After 2 minutes water will stop pumping
and the HOT WATER TAP will flash.
- Return the dial to the vertical position.
- The Descaling Cycle is complete.
Descaling Cycle Complete
- To indicate the completion of the
Descaling Cycle the machine will beep
and the Descale LIGHT will stop flashing.
Descaling Cycle Clean Up
- Empty water from the containers and
clean, ensuring that all traces of the
descaling solution have been removed.
- Reinstall the water filter and water filter
holder into the water reservoir.
Descaling cycle – Espresso machine
To Next Page
Loading...
