SunFounder 3in1 Kit
Name ITEMS IN THIS KIT LINK
3 in 1 Starter Kit 380+
You can also buy them separately from the links below.
COMPONENT INTRODUCTION PURCHASE LINK
Arduino Uno R4 Minima -
Jumper Wires
Servo
Schematic
In this project, we use PWM pin 9 to drive the Servo, and get the orange wire of the servo connected to the PWM pin
9, the red one to 5V, and the brown one to GND.
Wiring
146 Chapter 4. Basic Projects
To Next Page
Loading...
