1 Safety Instructions
When installing, commissioning, operating, and maintaining the product, strictly observe
relevant safety instructions. Improper use or misoperation may result in:
• Injury or death to the operator or a third party.
• Damage to the product or the property of the operator or a third party.
• The safety instructions in this manual are only supplements and cannot cover
all the precautions that should be followed. Perform operations considering
actual on-site conditions.
• SUNGROW shall not be held liable for any damage caused by violation
of general safe operation requirements, safety standards, and the safety
instructions specified in this manual.
• When installing, operating, and maintaining the device, comply with local laws
and regulations. The safety precautions in this manual are only supplements
to local laws and regulations.
WARNING
Only professional electricians or qualified personnel can operate and wire the
product.
Warning Label
Warning label on enclosure of the Data Logger is as follows:
Symbol Explanation
High voltage inside. Risk of electrical shock hazard
when it is touched.
This symbol indicates a protective ground terminal
which needs to be firmly grounded to ensure the safety
of operators.
1
To Next Page
Loading...
Need help?
General
