7 Web Main Interface User Manual
7.7 Device Maintenance
7.7.1 Device List
The Device List function is used for managing devices connected to the Data Logger and
configuring addresses for these devices. Devices can be searched and automatically added.
7.7.1.1 Auto Search
The “Auto Search” function is used for SUNGROW string inverters with addresses
automatically allocated.
Inverters without a serial number do not support the automatic search function and
device adding function.
Automatic address allocation pops up only when there is an actual address
confrontation.
step 1 Click Device > Device List to enter the corresponding page.
step 2 Click Auto Search to open the Auto Search pop-up window. Select Port, and click Search.
step 3 The devices that meet the search criteria will be displayed.
- - End
7.7.1.2 Export
step 1 Click Device > Device List to enter the corresponding page.
step 2 Click to export the device list.
- - End
7.7.1.3 Import
step 1 Click Device > Device List to enter the corresponding page.
step 2 Click to export the device list.
step 3 After the device list is exported, user can modify device names in batch.
step 4 After the modification is completed, save the device list file in the .csv format.
step 5 Click to import the .csv file into the Web interface.
- - End
52
To Next Page
Loading...
Need help?
General
