7 Web Main Interface User Manual
7.6.4 Operation Parameters
Click Device Monitoring > Operation Parameters to enter the corresponding page and set
operation parameters.
Both individual and batch settings are supported. For configuration methods, see 7.6.3 Initial
Parameter.
7.6.5 System Parameters
Click Device Monitoring > System Parameters to enter the corresponding page and set
the system time of the device.
Both individual and batch settings are supported. For configuration methods, see 7.6.3 Initial
Parameter.
7.6.6 Protection Parameter
Click Device Monitoring > Protection Parameters to enter the corresponding page and set
protection parameters.
Both individual and batch settings are supported. For configuration methods, see 7.6.3 Initial
Parameter.
7.6.7 Protection Parameters (Other)
Click Device Monitoring > Protection Parameters Others to enter the corresponding page
and set protection parameters.
Both individual and batch settings are supported. For configuration methods, see 7.6.3 Initial
Parameter.
Protection Parameters Others may vary by inverter model. Please refer to the
actual page.
7.6.8 Power Regulation Parameters
Click Device Monitoring > Power Regulation Parameters to enter the corresponding page
and set power regulation parameters.
Both individual and batch settings are supported. For configuration methods, see 7.6.3 Initial
Parameter.
50
To Next Page
Loading...
