12 FAQ User Manual
How to log into the system via R&D account and how to obtain the
password?
Generally, the O&M users have access to most of onsite configurations. If there is any needs
to use the R&D account, contact SUNGROW to obtain a temporary password which is valid
only as of this day.
How to connect multiple Data Loggers to the background through the
network?
1.
Data Loggers closer to the Ethernet switch (＜ 100m) are connected to the Ethernet
switch by using network cables.
2.
Data Loggers relatively far away from the Ethernet switch (＞100m) are connected to the
Ethernet switch by using routed fiber optic cables.
3.
Once the connection is established, it is important to set the IP addresses of multiple
Data Loggers to the same network segment, ensuring that there are no duplicate IP
addresses assigned.
98
To Next Page
Loading...
Need help?
General
