47
6.4 Preparation Before Electrical Connections
6.4.1 Opening PCS Door
Open the doors before wiring.
Unlock all six door locks with keys to open the cabinet door.
Be sure to secure all door locks reliably when closing the cabinet door to avoid ac-
cidents caused by poor protection.
6.4.2 Removing the Protective Mesh
The PCS is equipped with a protective mesh inside to maintain safe operation. Remove the
mesh before electrical connections.
All external cables should be connected to internal terminals through the cable en-
tries at the bottom of the PCS.
step 1 Open the cabinet door and find the protection mesh.
step 2 Unscrew the bolts at the lower edge of the protective mesh and remove the mesh.
- - End
User Manual 6 Electrical Connection
To Next Page