87
10.8.1.3 Edit device
step 1 Click [Device]→[Device List] to enter the corresponding interface.
step 2 Click [Save all operation] to save all information.
The “[Device Name]” is named in the form: (port number-communication
address).
- - End
10.8.1.4 Delete device
After a device is deleted on site, the user can delete the device from the device list, to keep
device consistency.
step 1 Click [Device]→[Device List] to enter the corresponding interface.
step 2 Tick devices to be deleted and click the button “[Delete]”.
step 3 Click “[Confirm]” on the pop-up window.
- - End
10.8.2 Firmware Update
Click “[Firmware Update]” to upgrade the firmware of SUNGROW PCS connected to the
SCU.
step 1 Click “[Device]→[Firmware Update]” to enter the corresponding interface.
step 2 Click “[Select a Firmware File]”. Select an upgrading file, and import it to the system, to
match the corresponding PCS.
step 3 Select the device to be upgraded and click “[Upgrade]”.
step 4 After the upgrade is completed, information such as the current version, target version, and
upgrade time can be viewed.
The upgrade package must be the .sgu file.
- - End
10.8.3 Fault Recorder
step 1 Click “[Device]→[Fault Recorder]” to enter the corresponding interface.
step 2 Click “[Read the recorder]” and click “[Confirm]” in the pop-up window, to enable the
option.
step 3 Click “[Trigger fault recording]” and click “[Confirm]” in the pop-up window, to trigger the
option.
step 4 Select the desired device, and click [
], to export corresponding data.
User Manual 10 Web Operation
To Next Page
Loading...
