SunStar Fortuna 5 Series - Automatic Change Function Oftwin Needles (Applicable to the Models Supporting Twin Needles) • -48

8) Automatic Change Function of Twin Needles (applicable to the models supporting twin needles)
(1) Related Parameters
Setting automatic diange functton for twin needles
0(disable)
1 (enable)
E-0 ~ E-135 Detailed settings for automatic change of twin needles See Parameter Group E.
A
Cautiofi
From 100 to 135, tt iey are redundantly displayed from 00 to 35.
(2) Features of Function
® Supporting existing pattern
functions
(DNo. of pattern in use
(D Use of Functions
If Parameter A-77 is set at (0) for Disable, the e}dsting pattem functions can be used as same.
Pattern No. 2.3,5 requiring changes can be set.
Set A-77 at 1 and set Parameter Group E's data.
A
If set values are changed without through understanding of Parameter Group E set values and "(3) Example of
Changes for Each Step," mechanical breakdown or physical damage may result. Therefore users are
recommended to have a thorough understanding before use.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com