SunStar Fortuna 5 Series User's Manual Parts Book

SAFETY INSTRUCTION
Be sure to read and keep in mind the following instructions before you install and use
thr FORTUN A SERVO MOTOR.
1) Use and Purpose
This product is designed, manufactured, and sold as an industrial sewing machine. It should not be used for
other than industrial purpose.
2) Working Environment
® Power Source
• It is desirable that voltage of the power source be kept within the range of ± 10% of the rated voltage.
• It is desirable that fr equency of die power source be kept within the rage of ± 10% of the rated fr equency.
(50/60HZ)
• The SERVO MOTOR can be expected to work normaly only in case the foregoing things are kept.
© Electromagnetic Noise
• It is desirable that those equipments causing strong electromagnetic fi eld or high fi ^quency not use the
same electrical outlet as this on and stay away fr om it.
@ Temperature and Humidity
• Keep the ambient temperature above 5 degrees and below 40 degrees Centigrade.
• Never use it outdoors and avoid direct ray of light
• Keep it away fr om an hot object like a stove.
• Keep the ambient humidity above 30% and below 95%.
® Never use it near gases and explosives.
® Do not use it at a spot located 1,000m or higer above sea-level.
® Keep the storage temperature higher than 25 degrees below zero and lower than 55 degrees Centigrade when
not in use.
3) installation
Follow the instmction carefully when installing it.
® Be sure to start installing it after pulling the power plug off the outlet
® Fbc the cable so that it may not move, and do not allow the moving parts like belts to be interfered with.(keep
distance of at least 25mm fr om them.)
® Be sure to have the Controller, the Motor and the sewing Machine grounded.
@ Be sure that the voltage of power source fi ts the specification of the Controller before the power is on
® Be sure to use Safety Extra Low Voltage when an extra item or an accessory is fi tted into the Controller.
4) Disassembly
® Indisassembling it, be sure to wait at least 360 seconds before taking any action after pulling the plug off the
power source after turning it off.
® When pulling off the plug fr om the power source, be sure to hole the plug itself instead of the wire connected
to the plug.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

SunStar Fortuna 5 Series Specifications

General

Brand	SunStar
Model	Fortuna 5 Series
Category	Engine
Language	English