SunStar Fortuna 5 Series - Specific Function Explanations

F. Pre-stitch function method of use and explanation
Item No. Name of function
Ml SefecSkxiofpre-slit^lunctCT
A48 Setpre-strtchingsljthnuntef
Af49 S^pre-sttehrig speed
Method of use and explanation
The pie-stildi function is a furxdion that programs the machine b sew a cert^ anyxjnt of slithes bdbre
(X3rrYnerK:^tt«actijaise^w3rk.(0:cisat3le, 1 :en^)
This item sets the numter of stidieswh^ using the pre-strldi function ((>'255slilches, Initiai value; 3 stitches)
ITiis item sete the sewing vrfien using the pre-stitch fuxSon.
{2t>-2l>D0tpm, Initial value: 2(D00ipm)
G, Method to select beginning/ending reverse sewing conditions
Item No. Name of function
Selection of start B/T conditions
(Initial value: 1)
Selection of end B/T conditions
(Initial value: 0)
Thespeedofthefirststitchduring
B/T exact performance
H. Method to select buttons A/B functions
Method of use and explanation
The start B/T fundion can t)e one of ti ie following three operations according to their set up value
• 0: If user releases pedal during B/T operatic, sewing stops.
• 1: If user releases pedal during B/T operation, sewing stops after finishing worlc.
• 2: The exact amount of stitches Is operated, notwithstanding the number of stitch
corrections. However, if this function is used, B/T will no operate naturally.
This item selects whetiier or not to use the end B/Ts exact number of stitches function operation
• 0: exact number of stitches function disabled
• 1: exact number of stitches function enabled
(If this function is used, reverse sewing will no operate naturally)
This Item selects the speed of the initial reverse stitch when user has selected the exact
number of stitches function in the B/T operation(20-1 OOOrpm, Initial value: 200rpm)
item No. Name of function
S^ection of button A function
(Initiai value: 2)
Selection of button B function
(Initial value: 0)
Method of use and explanation r.- ■
The function of button A can be one of the following four operations according to their set up value.
• 0: If user presses A button while sewing, B/T sewing is operated while user keeps on pressirtg it
• 1: If user presses the A button while sewing, B/T sewing is operated.
If user stops sewing and presses A button once the needle plate is iifted.
If user presses it once more, the needle plate Is dropped
• 2: If user presses the A button while sewing, B/T sevifing is operated
while user keeps on pressing it. If user stops sewing and presses A button once,
the needle plate is iift^. If user presses it twice consecutively,
the needle plate is drop^.
• 3: If user presses A button while sewing, B/T sewing is operated while user keeps on pressing
it When user stops sewing and presses the A button, 1/2 stitch speed is operated.
The hjnction of button A can be one of the following four operations according to their set up value.
• 0: This item has the function of inserting/deleting the B/T sewing when user presses the B button.
If the user presses the B button where there is no B/T sewing section, B/T sewing is inserted
and when it is pressed where there is a B/T sewing section, B/T sewing is deleted.
• 1: If user presses the B button once, the needle plate is lifted and if user presses it once more, it is dropped
• 2: When user slops sewing and presses the B button, 1/2 stitch speed is operated while user presses it
• 3: When sewing, B/T sewing is operated while user presses B button.
I. Method of use of motor rotating direction selection function
Item No. Name of function
Selecting the motor's rotating
direction
Method of use and explanation
This item sets up the set up value according to the motcx's rotating direction
• 0: clockwise rotation ^ „
• 1: counterclockwise rotation(lnitial value) i—|__i ^ccw ^cw
If the specific items of Uie parameter are changed carelessly, they could break down or damage the machine, so the
user must be well-trained before using It.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com