1) Sewing Method
A. Turn on the power switch.
B. Execute required settings such as [sewing pattern] or
[width] on the operation panel.
C. Set the stitch width with feed adjustment dial.
D. Step the pedal and start sewing.
[ Fig. 21 ]
Width
Stitch width
↓
↑
6
21
[ Note ]
· Please attach protection device for safety.
Using without attaching this device, it becomes cause of injury.
· Please turn off the power in the following cases.
Pedaling by mistake, the sewing machine operates and it becomes cause of injury.
- Upper Thread passing
- Exchange of bobbin or needle
- When not using the sewing machine, or in case of being away from the sewing machine
· Please do not touch or press the operating part while sewing.
It becomes cause of injury or breakage of sewing machine.
· Do not touch the solenoid part in case of the sewing machine with automatic presser foot lifter. You can get burns
upon touching it.
To Next Page
Loading...
