16
[Fig. 8]
[Fig. 9]
[Fig. 10]
A. Check the amount of oil left in the oil tank
which is installed on the arm and supply oil
sufficiently.
B. As shown in the picture, move the feed
bracket in the direction of “A”and supply oil
into the bed oil window through the hole on
the bed cover.
C. Supply oil into the hole in the upper part of
the arm.
[ Caution ]
Be sure to supply oil when operating the machine
for the first time or when the machine has not
been used for long time.
2) How to Supply Oil
To Next Page
Loading...
