22
ⓐ Do not put floppy disks near magnetic-related materials
such as television.
ⓑ Keep away from overheat, humidity or direct ray of light.
ⓒ Do not put any heavy material on a floppy disk.
ⓓ During formatting or inputting and outputting floppy disks,
do not take out a floppy disk from a disk drive.
ⓔ Do not open a cover of floppy disk.
ⓕ If a write protect tab is opened, you can’t input data in a
disk
ⓖ If you repeat read and write in a disk many times, error
can be occurred in a disk.
ⓗ It is safe to keep important design data in two disks.
① Shuttle ② Write protect tab
①
②
[ Caution ]
Use the identified floppy disks after formatting when you get floppy disks in market.
15) Caution When Using the Floppy Disks
Observe the following principles thoroughly when you treat floppy disks.
[Fig. 26]
[Fig. 27]
14) How to attach and detach V-Belt (A Series)
A. Loosen a fixing screw of Belt Cover① to disassemble Belt Cover from the sewing machine.
B. Loosen a fixing nut② of Motor to rise it up to the arrow.
C. When V-Belt tension gets loosened, remove V-Belt.
To Next Page
Loading...
