SunStar SPS/B-2516 Series - Exchanging the Fuse

40
23) Exchanging the Fuse
■To prevent from electric shock, turn off the power and wait 5 minutes, then open
the cover.
■Be sure to turn off the power and exchange into the fuse of the designated quantity
after opening the cover of control box.
Caution
< Main shaft Motor drive Board >
< Power Board >
Quantity Use
①
No
0.5A
For the Protection of thread sensor
②
3A
For the Protection of control power
③
7A
For the Protection of actuator
④
8A
For the Protection of step driver
⑤
0.5A
For the Protection of step-aux
⑥
5A
7A
INPUT 220V
INPUT 110V
For the Protection of main power
⑦
6.3A
For the Protection of servo motor
⑧
0.5A
For the Protection of servo motor drive
①
②
③
④
⑤
⑥