Page | 37Hybrid Inverter | Installer Manual
5.8. Set Company Name / Beeper / Auto dim
To set company name click on the BASIC icon and then on ‘Display’.
What this page displays:
Beeper status (ON/OFF).
Installers names.
What you can do from this page:
Set up your company name.
Switch the beeper ON or OFF.
Set the LCD backlight to auto dim
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
85%
BATTERY IN/OUT MPPT. GRID.
SOLAR/TURBINE AC load
Battery Grid
How to change the name:
Change the letters in each box by mov-
ing the arrows up and down and then
select OK. This will change the name
on the home screen.
How to set the auto dim:
Set a number in the auto dim box to
dim the LCD after a number of sec-
onds.
How to turn the beep on or off:
Mark or unmark the beep box and the
press OK to configure it as you prefer.
To Next Page
Loading...
Need help?
General