SunSynk SYNK-7K-SG05LP1 User Manual

ECCO SG05LP1 | User Manual10
TECHNICAL SPECIFICATIONS
Model SYNK-7K-SG05LP1 SYNK-8K-SG05LP1
Battery Input Data
Battery Type Lead-acid or Lithium-ion
Battery Voltage Range 40~60V
Max. Charging Current 175A 190A
Max. Discharging Current 175A 190A
Charging Curve 3 Stages/Equalisation
External Temperature Sensor Yes
Charging Strategy for Li-Ion Battery Self-Adaptation to BMS
PV String Input Data
Max. DC Input Power 10000W 10400W
PV Input Voltage 370V (125V~500V)
MPPT Range 150~425V
Start-up Voltage 125V
Full Load DC Voltage Range 200~425V
PV Input Current 26A+26A
Max. PV Isc 34A+34A
No. of MPPT / Strings Per MPPT 2/1+1
AC Output Data
Rated AC Output and UPS Power 7000W 8000W
Max. AC Power 7700W 8800W
Peak Power (o-grid) 2 times of rated power, 10 S
AC Output Rated Current 30.5A 36.4A
Max AC Current 33.5A 40A
Max Continuous AC Passthrough 50A
Output Frequency and Voltage 50/60Hz; L/N/PE 220/230Vac (single phase)
Grid Type Single-Phase
Current Harmonic Distortion THD<3%(Linear load<1.5%)
Eciency
Max. Eciency 97.60%
MPPT Eciency 97.00%
Euro Eciency 99.90%
Protection
Integrated
PV Input Lightning Protection, Anti-islanding Protection, PV String
Input Reverse Polarity Protection,Insulation Resistor Detection,
Residual Current Monitoring Unit, Output Over Current Protec-
tion,Surge protection
Certications and Standards
Grid Regulation
CEI 0-21, VDE-AR-N 4105, NRS 097, IEC 62116, IEC 61727, G99,
G98, VDE 0126-1-1, RD 1699, C10-11
Safety EMC / Standard IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2

SunSynk SYNK-7K-SG05LP1 Specifications

General

Brand	SunSynk
Model	SYNK-7K-SG05LP1
Category	Inverter
Language	English