SunSynk SYNK-7K-SG05LP1 - Battery and Generator Settings

ECCO SG05LP1 | User Manual38
 Battery capacity in (Ah): For non-BMS-batteries the range allowed is 0-2000Ah, while for lithium-ion,
the inverter will use the capacity value of the BMS.
 Charge/Discharge Amps: The Max battery charge/discharge current (0-175A for 7kW model, 0-190A for
8KW model).
 AGM V: Use battery voltage for all settings (V).
 AGM %: Use battery SOC for all settings (%).
 No batt: Tick this box if no battery is connected to the system.
 Active battery: This feature will help recover a battery that is 100% discharged by slowly changing from
the solar array. Until the battery reaches a point where it can change normally.
 TEMPCO settings: The temperature coecient is the error introduced by a change in temperature.
What this page displays:
 Remote control option.
What this page displays:
 Allows remote control of the inverter.
What you can do from this page:
Battery Setup Page
To congure battery settings, click on the BATTERY icon and then on ‘Batt type’.
Inverter Remote Control
To control the inverter remotely, tick the box that allows it.