SUNWARD SWDM240B - Page 198

SWDM240B OPERATION & MAINTENANCE MANUAL
197
FIG. 7-10-1
2） Turn battery cathode switch to OFF position (cut-off) and take out the key, as
below：
FIG. 7-10-2
3）
Disconnect cathode cable on the battery.
4
）
Disconnect anode cable on the battery.
5
）
Disconnect battery cable on the battery cathode switch, repair or change battery if necessary.
6
）
Connect battery cable on the battery cathode switch.
7
）
Connect anode cable of battery.
8
）
Connect cathode cable of battery.
9
）
Insert the cathode switch key to turn battery cathode switch to ON (connect) position, as
below:
FIG.7-10-3