EasyManua.ls Logo

SUNWARD SWDM240B - Safe Disposal of Chemicals; Safety Facilities; Emergency Exit; Fire Extinguisher

SUNWARD SWDM240B
228 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SWDM240B OPERATION & MAINTENANCE MANUAL
26
adding fuel. Add fuel outdoors.
3 Do not put oil-containing rags on the machine to ensure the machine stays clean.
1.7.22 Safe Disposal of Chemicals
1 Touching harmful chemicals directly will cause serious injury to the human body. The
chemicals used in this machine, such as lubricant, coolant, paint, and adhesive may be
harmful
.
2 Before using harmful chemicals, check and understand its danger; know how to use
them safely
.
1.8 SAFETY FACILITIES
1.8.1 Emergency Exit
Emergency exit: A safety hammer is placed on the left side of the operator in case for emergency
and when the cab door is locked firmly, by which operator can smash the window with
emergency exit and escape from the machine.
1.8.2 Fire Extinguisher
A fire extinguisher with 1 kg, is located in the cab. When there’s a fire, open the cab door
to take out it, and pull out the safety catch, press down the handle and shoot at the flame root.
1.8.3 Emergency Stop
There's a emergency stop button on the right of the control panel (as following FIG.). Press
down this button immediately to shut off all the drilling function in case of any emergency. Pull
back the button to operate after everythig is normal.

Table of Contents

Related product manuals