“Button 1- Working switch” in the membrane
key panel is not connected:
Push handle forward, auxiliary winch lower.
Push handle rearward, auxiliary winch lift.
Push handle leftward, rotary head rotate
clockwise;
Push handle rightward, rotary head rotate
anticlockwise;
★Press “Button 7” once, push the handle
leftward and rightward to the end respectively
to lock it, press again to unlock it.
The handle must be locked before the driver
leaves the seat of the cab. All the hydraulic
functions are disabled when the safety handle is
in the “OFF” position.
Enable the pilot control: the handle is moved to
the position 1.2;
Disable the pilot control: the handle is moved
to the position 1.1.
To Next Page
Loading...