Overhaul Manual
O-360 and IO-360 Series Engines
7
© March 2005 Superior Air Parts Inc.
72-00-13
Repair Procedures
REPAIR NO. 2
NICK AND SCRATCH REPAIR
Repairs
(1) Using hand file or abrasive (crocus) cloth,
remove minor nicks and scratches on
mating surfaces of accessory housing,
crankcase and accessory assemblies, and
mounting flanges or bodies of other
components.
(2) If necessary, lap mating surfaces on a
surface plate to remove abnormal damage.
(3) Clean to remove all abrasive dust and other
debris. If lapping was performed, check the
part with its mate to assure that the
clearances are still within tolerances. Refer
to Fits and Clearances section of this
manual for limits.
To Next Page
Loading...
Need help?
General
