Overhaul Manual
O-360 and IO-360 Series Engines
Consumable Materials List
Refer to Table 01-00-00.2 below for consumable
materials used during repair of the Vantage O-
360 and IO-360 series engines.
NOTE:
Equivalent substitutes may be used.
Table 01-00-00.2 • Consumable Materials
Material Source
Acetone or Methyl Ethyl Ketone (MEK) Commercially Available
Assembly Grease – Lubriplate No. 105 Commercially Available
Cleaning Solvent Commercially Available
Copper Based Anti-seize, Fel-Pro
TM
C5-A Commercially Available
Fuelube
TM
Ohio Industrial Lubricants
Isopropyl alcohol Commercially Available
Loctite
TM
271, P/N 27183 Commercially Available
Loctite
TM
No. 2 Gasket Sealant P/N 30514 Commercially Available
Lubricating Oil, SAE 10 Commercially Available
Lubricating Oil, SAE 50 Commercially Available
Mineral Oil (MIL-L-6082), SAE 50 weight Commercially Available
Permatex
TM
, P/N 27100 Commercially Available
Pliobond
TM
#20 Commercially Available
Pre-Lube Mixture – approx. 15% pre-lubricant
(STP
TM
brand or equivalent) plus 85% SAE 50
straight weight mineral oil
Locally Prepared Mixture
Preservative oil mix (MIL-C-6529, type 1 plus
MIL-L-6082)
Locally Prepared Mixture
RTV
TM
102 Silicon Sealant General Electric
Safety Wire (0.032) Type 304 Stainless Steel,
P/N MS20995 C32
Commercially Available
Safety Wire (0.041) Type 304 Stainless Steel,
P/N MS20995 C41
Commercially Available
Silastic
TM
140 Sealant Commercially Available
Silk thread, size 00 (100% Silk) Commercially Available
STP
TM
High Viscosity Oil Treatment Commercially Available
TitesealTM No. 2 Gasket and Joint Compound
P/N T2-01
Commercially Available
Phthalate resin-type enamel AMS3125C or
equivalent MIL-E-7729 Randolph Black (#303)
Commercially Available
Toluene or equivalent AMS3180 (or equivalent
Federal Spec TT-T-548)
Commercially Available
Zinc Chromate Primer Commercially Available
3
© March 2005 Superior Air Parts Inc.
01-00-00
Introduction
To Next Page
Loading...
Need help?
General
