Overhaul Manual
O-360 and IO-360 Series Engines
Preservation and Corrosion Prevention
A. Upon conclusion of visual inspection
and all cleaning operations, rinse parts
with petroleum solvent. Dry and remove
any loose particles by air blast. Apply a
liberal coating of preservative oil to all
surfaces.
B. For parts that will be repainted, do the
following:
(1) Be sure that the part is thoroughly
degreased, clean, and dry.
(2) Prime and paint in accordance with
Repair section.
4
© March 2005 Superior Air Parts Inc.
72-00-07
Cleaning
To Next Page
Loading...
Need help?
General
