SC826 JBOD Chassis Manual
1-2
1-3 Components
Drives
The chassis supports twelve hot-swap 3.5" SAS or SATA hard disk drives in the
front. The drives are supported by a backplane.
Power Supply
The chassis features two redundant digital power supplies, each 650 watts with a
Cooling
The chassis includes three 80 mm heavy-duty, hot-swap fans and two 80 mm
exhaust fans. System fans are powered and controlled by IPMI using 4-pin
connectors.
Control Board
The JBOD control board allows the user to remotely control and monitor the chassis
temperature data from the backplane.
Mounting Rails
Rack mount rails allow you to mount the chassis in a rack. The rails feature snap-in
installation and quick release, and support modern square hole racks. Round hole
rack are supported with a conversion kit.
1-4 Where to get Replacement Components
If you need replacement parts for your system, to ensure the highest level
of professional service and technical support, purchase exclusively from our
Supermicro Authorized Distributors/System Integrators/Resellers. A list can be found
at: http://www.supermicro.com. Click the "Where to Buy" link.
1-5 Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your vendor
for a Returned Merchandise Authorization (RMA) number. When returning to the
manufacturer, the RMA number should be prominently displayed on the outside of
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
To Next Page
Loading...
Need help?
General
