Chapter 4: BIOS
4-21
4-6 TPM (Trusted Platform Modules) State
Choose the TPM State menu from the Phoenix BIOS Setup Utility with the arrow
keys. You should see the following display.
Current TPM State
This item shows the current TPM State only.
Change TPM State
Select Enabled & Activate to enable TPM support for the system. Select De-activate
& Disabled to disable the function of TPM support. If No Change is selected, no
changes will be made to the current TPM State. Select Clear to clear or erase all
information related to TPM support.
If set to Clear, the submenu:-Physical Presence Operations will appear. Select Re-
ject to cancel the selection. Select Execute to proceed with selection. All information
related to TPM Support will be erased.
To Next Page
Loading...
