Release : 1.1f 265 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Port Control = Force Authorized
QuietPeriod = 60 Seconds
Re-authentication = Disabled
ReAuthPeriod = 3600 Seconds
ServerTimeout = 30 Seconds
SuppTimeout = 30 Seconds
Tx Period = 30 Seconds
If access-control for only Gi0/1 is made active then display will
be as given below:
Dot1x Info for Gi0/1
---------------------
PortStatus = UNAUTHORIZED
AccessControl = ACTIVE
AuthSM State = CONNECTING
SuppSM State = AUTHENTICATED
BendSM State = IDLE
AuthPortStatus = UNAUTHORIZED
SuppPortStatus = AUTHORIZED
ControlDirection = BOTH
MaxReq = 2
Port Control = Auto
QuietPeriod = 60 Seconds
Re-authentication = Disabled
ReAuthPeriod = 3600 Seconds
ServerTimeout = 30 Seconds
SuppTimeout = 30 Seconds
Tx Period = 30 Seconds
Start Period = 30 Seconds
Held Period = 60 Seconds
Auth Period = 30 Seconds
Dot1x Info for Gi0/2
---------------------
PortStatus = AUTHORIZED
AccessControl = INACTIVE
AuthSM State = INITIALIZE
BendSM State = INITIALIZE
AuthPortStatus = AUTHORIZED
To Next Page
Loading...
