Release : 1.1f 859 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.28 ipv6 ospf priority
This command sets the router priority, which helps to determine the Designated Router for this
network. The no form of the command sets the default router priority for an interface.
ipv6 ospf priority <1-255>
no ipv6 ospf priority
Mode
Interface Configuration Mode
Defaults
priority - 1
Example
SMIS(config-if)# ipv6 ospf priority 7
A priority value of 0 signifies that the router is not eligible to become the designated router on a
particular network.
Related Command
show ipv6 ospf interface – Displays the OSPFv3-related interface information
To Next Page
Loading...
