Release : 1.1f 369 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.31 debug garp
This command enables module-wise debug traces, which can be GARP, GVRP or GMRP.
debug garp { global | [{protocol | gmrp | gvrp | redundancy} [initshut]
[mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]] }
no debug garp { global | [{protocol | gmrp | gvrp | redundancy}
[initshut] [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]] }
Syntax Description
global - Global related debug messages
protocol - Protocol related traces
gmrp - GMRP related traces
gvrp - GVRP related traces
redundancy Redundancy related debug messages
initshut - Init and Shutdown
mgmt - Management
data - Data path
ctpl - Control Plane
dump - Packet dump
os - Traces related to all Resources except Buffer
failall - All Failures
buffer - Buffer
all - All Traces
Mode
Privileged Exec Mode
Defaults
Disabled
Example
SMIS# debug garp fwd all
Related Command
show debugging - Displays state of each debugging option
To Next Page
Loading...
