Release : 1.1f 891 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
32.2 class-map
This command creates a class map that is meant to be used for matching the packets to the class
whose index is specified. This command is also used to enter the class-map configuration mode
The no form of this command is used to delete an existing class map and to return to global
configuration mode
class-map <class-map-number(1-65535)>
no class-map <class-map-number(1-65535)>
Syntax Description
class-map-number - QoS class map number
Mode
Global Configuration Mode
Example
SMIS(config)# class-map 5
Differentiated services must have been enabled in the device.
The class-map command and its subcommands are used to define packet classification, marking,
and aggregate policing as part of a globally named service policy applied on a per-interface basis.
The match command is available from the class-map configuration mode
Related Command
show class-map - Displays quality of service (QoS) class maps
To Next Page
Loading...
