Supermicro SSE-X3348S - Show Ip Pim Bsr

Release : 1.1f 565 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.29 show ip pim bsr
This command displays the BSR information.
show ip pim bsr [Component-Id (1-255)]
Syntax Description
Component-Id - Component ID
Mode
Privileged EXEC Mode
Example
SMIS# show ip pim bsr 1
PIMv2 Bootstrap Configuration For Component 1
-----------------------------------------------
This system is the Bootstrap Router (BSR)
BSR Address: 10.0.0.1
BSR Priority: 6, Hash Mask Length: 30
Related Command
ip pim bsr-candidate – Sets the preference value for the local interface as a candidate
bootstrap router