Release : 1.1f 977 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.16 debug lldp
This command enables the display of LLDP debug messages.
The no form of this command disables the display of LLDP debug messages.
debug lldp [{all | [init-shut] [mgmt] [data-path] [ctrl] [pkt-dump]
[resource] [all-fail] [buf] [neigh-add] [neigh-del] [neigh-updt]
[neigh-drop] [neigh-ageout] [critical][tlv {all | [chassis-id][port-id]
[ttl] [port-descr] [sys-name] [sys-descr] [sys-capab] [mgmt-addr]
[port-vlan] [ppvlan] [vlan-name] [proto-id] [mac-phy] [pwr-mdi] [lagg]
[max-frame]}]}]
no debug lldp [{all | [init-shut] [mgmt] [data-path] [ctrl] [pkt-dump]
[resource] [all-fail] [buf] [neigh-add] [neigh-del] [neigh-updt]
[neigh-drop] [neigh-ageout] [critical][tlv {all | [chassis-id][port-id]
[ttl] [port-descr] [sys-name] [sys-descr] [sys-capab] [mgmt-addr]
[port-vlan] [ppvlan] [vlan-name] [proto-id] [mac-phy] [pwr-mdi] [lagg]
[max-frame]}]}]
Syntax Description
all – displays all debug messages
init-shut – displays initialization and shutdown messages
mgmt – displays management messages
data-path – displays all data path messages
ctrl – displays all control messages
pkt-dump – displays the contents of all LLDP packets
resource – displays the resources (like memory) utilization debug messages
all-fail – displays all failure events
neigh-add – displays all neighbor addition events
neigh-del – displays all neighbor deletion events
neigh-updt – displays all neighbor update events
neigh-drop – displays all neighbor drop events
neigh-ageout – displays all neighbor aging out events
critical – displays all critical event messages
tlv all – displays all TLV information
tlv chassis-id – displays chassis identifier TLV information
To Next Page
Loading...
