Release : 1.1f 291 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Number of Ports = 2
HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = LACP
MAC selection = Dynamic
SMIS# show etherchannel 1 port
Channel Group Listing
---------------------
Group: 1
----------
Protocol :LACP
Ports in the Group
------------------
Port : Gi0/1
-------------
Port State = Up in Bundle
Channel Group : 1
Mode
: Active
Pseudo port-channel = Po1
LACP port-priority = 128
LACP Wait-time = 2 secs
LACP Port Identifier = 2
LACP Activity : Active
LACP Timeout : Long
Aggregation State : Aggregation, Sync, Collecting, Distributing,
Port : Gi0/2
-------------
Port State = Up in Bundle
Channel Group : 1
Mode
: Active
To Next Page
Loading...
