Release : 1.1f 946 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
redirect tcp - Specifies the TCP packets to be redirected based on the associated
parameters
permit udp - Specifies the UDP packets to be forwarded based on the associated parameters
deny udp - Specifies the UDP packets to be rejected based on the associated parameters
redirect udp - Specifies the UDP packets to be redirected based on the associated
parameters
permit icmp - Specifies the ICMP packets to be forwarded based on the IP address and the
associated parameters
deny icmp - Specifies the ICMP packets to be rejected based on the IP address and
associated parameters
redirect icmp - Specifies the ICMP packets to be redirected based on the IP address and
associated parameters
ip access-group - Enables access control for the packets on the interface
To Next Page
Loading...
