10
SuperServer 6029U-T Series User's Manual
Figure 1-1. Control Panel
1.4 Chassis Features
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
Control Panel Features
Item Features Description
1 Power button
The main power switch applies or removes primary power from the power supply to
the server but maintains standby power.
2 Reset button Reboots the system.
3 Power LED
Indicates power is being supplied to the system power supply units. This
LED is illuminated when the system is operating normally.
4 NIC LED
5 Power Fail LED Indicates a power supply module has failed.
6 HDD LED
7 NIC LED
8 Information LED Alerts operator to several states, as noted in the table below.
1
6
5
4
3
8
2
7
To Next Page
Loading...
