Chapter 6: BIOS
117
6.7 Boot
Boot Settings.
Boot mode select
Use this item to select the type of device that the system is going to boot from. The options
are LEGACY, UEFI, and DUAL. The default setting is DUAL.
LEGACY to EFI support
Use this item to enable the EFI boot support. The options are Disabled and Enabled.
FIXED BOOT ORDER Priorities
This option prioritizes the order of bootable devices that the system to boot from. Press
<Enter> on each entry from top to bottom to select devices.
*If the item above set to Legacy/UEFI/Dual, the following items will be displayed:
• Legacy/UEFI/Dual Boot Order #1
• Legacy/UEFI/Dual Boot Order #2
• Legacy/UEFI/Dual Boot Order #3
• Legacy/UEFI/Dual Boot Order #4
• Legacy/UEFI/Dual Boot Order #5
To Next Page
Loading...
