Supermicro SuperServer 6029U-TR25M - Network Stack Configuration; Super Io Configuration

SuperServer 6029U-T Series User's Manual
100
/ AOC-URN6-i2XT NVMe2 OPROM (Available when the device is detected by the
system)

by the user for system boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Select Legacy to boot the system using a legacy video device installed on the motherboard.
The options are Disabled, Legacy, and EFI.
Network Stack Conguration
Network Stack

support. The options are Disabled and Enabled.
*If the item above "Network Stack" is set to Enabled, the following items will be
displayed:
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable Ipv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable Ipv6 HTTP boot support. The options are Disabled and Enabled.
PXE boot wait time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.
Super IO Conguration
Super IO Conguration
The following Super IO information will be displayed:
• Super IO Chip AST2500