SuperServer 6029U-T Series User's Manual
28
Figure 3-1. Removing the Chassis Cover
3.2 Accessing the System
The SC829U chassis has a removable top cover to access internal components.
Removing the Top Cover
1. Remove the two screws on each side of the cover, which secure the cover to the
chassis. These two screws are optional and will not impact functionality if they are not
installed.
2. Press the two release buttons and slide the cover toward the rear and lift off.
Check that all ventilation openings on the top cover and the top of the chassis are clear and
unobstructed.
Caution: Except for short periods of time, do not operate the server without the cover in place.
Remove
Screw
Remove
Screw
1
2
1
2
To Next Page
Loading...
