Supermicro SuperServer 6029U-TR25M - Quick Reference

14
SuperServer 6029U-T Series User's Manual
Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JWD1 Watch Dog Pins 1-2 (Reset)
Connector Description
BP PWR1/2/3/4 8-pin power connectors 1/2/3/4 for backplane use
BT1 Onboard battery
COM1 COM port (COM1) on the I/O backplane
FAN1 - FAN8 System/CPU fan headers
GPU PWR1/2/3/4 8-pin power connectors 1/2/3/4 used for GPU devices
IPMI_LAN Dedicated IPMI LAN Port
I-SATA0-3, I-SATA4-7 Intel PCH SATA 3.0 ports (0-3, 4-7)
JF1 Front control panel header
JHFI1/JHFI2
Host Fabric Interface (HFI) sideband connection headers used for the HFI carrier card
(when the F model processor is used) (JHFI1: for CPU1, JHFI2: for CPU2)
JIPMB1 4-pin BMC external IC header (for an IPMI card)
JL1 Chassis intrusion header
JNVI
2
C1/2
NVMe SMBus (I
2
C) headers used for PCIe hot-plug SMBus clock and data connections
(a proprietary NVMe add-on card and cable are required; available only for Supermicro
complete systems)
JRK1 RAID_Key for onboard NVMe devices
JSD1/JSD2 SATA DOM power connectors 1/2
JSDCARD1 Micro SD card slot
JTPM1 Trusted Platform Module/Port 80 connector
JUIDB2 
JVGA2 Front VGA Port
JVRM1/JVRM2 VRM I2C headers
P1_NVMe0/1 &
P2_NVMe0/1
Non-Volatile Memory Express (NVMe) 3.0 devices 0/1 supported by CPU1 & CPU2
PSU1/PSU2 Power Supply Unit (PSU) Connector 1/Power Supply Unit Connector 2
S-SATA0-3 SATA 3.0 ports 0-3 supported by Intel SCU chip
S-SATA4/S-SATA5 SATA3.0 ports with power-pin built-in w/support of SuperDOM (Device-On Module)
SP1 Internal speaker/buzzer
SXB1A/SXB1B/SXB1C
PCIe 3.0 (x16 + x16) slot supported by CPU2 for proprietary riser card (w/left riser card
support)
SXB2 PCIe 3.0 x8 (in x16) slot supported by CPU2 for center right riser card support
SXB3A/SXB3B/SXB3C
PCIe 3.0 (x16 + x16 + x8) slot from CPU1 for far_right ultra riser (SAS3 AOM & LAN
options)
T-SGPIO3 Serial_Link General Purpose I/O header for S-SATA4/5
USB0/1 Backplane Universal Serial Bus (USB) 3.0 ports 0/1
USB3/4 Front Accessible USB 3.0 header for USB 3/4 connections